DIP RJ48/RJ50 Jack 10P10C Shielded R/A
Rated current: 1.5A
Rated voltage: 125VAC
Dielectric Withstanding Voltage: 1000V AC for 1 minute.
Insulation Resistance: 500MΩ min.
Contact Resistance: 20mΩ max.
Operating Temperature:
-40°C ~ +80°C.
Rated voltage: 125VAC
Dielectric Withstanding Voltage: 1000V AC for 1 minute.
Insulation Resistance: 500MΩ min.
Contact Resistance: 20mΩ max.
Operating Temperature:
-40°C ~ +80°C.
Shielded Right-Angle 10P10C RJ48/RJ50 Jack is rated for 1.5 A and 125 V AC, with insulation resistance above 500 MΩ, 1000 V AC dielectric withstand for one minute, contact resistance below 20 mΩ, and an operating temperature of -40°C to +80°C.
Suitable for telecom equipment, industrial controllers, test instruments, data-acquisition equipment, and 10P10C modular interfaces.
Products
- CABLE ASSEMBLY & WIRE HARNESS
- Connector
- SFP / QSFP Optical Transceivers
- RJ45 Connector
- Cat 5e RJ45 Keystone Inline Coupler
- RJ 45 Inline Coupler
- RJ45 Connector 8P8C with Latch Shielded Vertical Type DIP with LEDs
- RJ45 Connector with LEDs DIP Type
- DIP RJ48/RJ50 Jack 10P10C Shielded Vertical
- DIP RJ48/RJ50 Jack 10P10C Shielded R/A
- 1x8 Ports DIP RJ45 Jack with LEDs
- 2x2 Ports DIP RJ45 Jack with LEDs
- DIP RJ45 Jack Unshielded with LEDs R/A
- DIP RJ45 Jack Unshielded with LEDs Vertical
- DIP RJ45 Jack Shielded with LEDs R/A
- DIP RJ45 Jack Shielded with LEDs Vertical
- SMT RJ45 Jack Unshielded R/A
- SMT RJ45 Jack Unshielded Vertical
- SMT RJ45 Jack Shielded Vertical
- SMT RJ45 Jack Shielded R/A
- SMT RJ45 Jack with LEDs R/A
- Slim RJ45 Connector with LEDs Right Angle Type
- Slim RJ45 Connector Vertical Type
- Dual USB2.0 + RJ45 8P8C Connector
- RJ45 Connector 8P8C SMT with LEDs
- RJ11 Connector 6P6C Shielded
- Terminal Block
- USB Connector
- Wire to Board Connector
- HDMI Connector
- D-Sub Connector
- SCSI Connectors
- DC Power Jack Connector
- FPC/FFC Connectors
- Pin Header & Female Header Connector
- ELECTRICAL-MECHANICAL COMPONENTS
- PRECISION HARDWARE PARTS